why is my trackr not connected
Trackr is a wearable device that you place on your clothing so that it can track your physical activity and monitor your health. It connects to your phone app to provide you with real-time data about your activity and progress. However, if you’ve recently had the Trackr replaced or upgraded, it may not be connecting to your phone app. Here are some tips on how to troubleshoot and fix the problem.
What happened to TrackR?
TrackR, a startup that made devices to track lost or stolen objects, went bankrupt in October. The company’s devices were discontinued in November and its website was taken down.
The company’s CEO, Michael Abbott, told The Verge that the company ran into financial trouble when “companies stopped buying our products.”
TrackR raised $24 million in venture capital from investors including Andreessen Horowitz and Obvious Ventures.
How do you connect a TrackR to your phone?
If you are having trouble connecting your TrackR to your phone, there are a few things that you can try.
First, make sure that you have the latest version of the TrackR app installed on your phone.
Second, make sure that you have charged your TrackR and your phone enough.
Third, try restarting your phone and your TrackR.
Fourth, try connecting to the TrackR using a different Wi-Fi network.
How do you connect a TrackR?
If you are having trouble connecting your TrackR to your computer, here are a few troubleshooting tips:
– Make sure that the TrackR is properly connected to your computer.
– Verify that your computer and TrackR are on the same network.
– Try restarting both the computer and TrackR.
– Try changing the TrackR’s network settings.
How do I reset my TrackR?
If you have a TrackR attached to your device but it’s not connecting, there are a few things you can try. First, check that your Bluetooth connection is strong and clear. Second, try restarting your device and the TrackR. Third, check that your TrackR is within range of your device. Finally, make sure that you’ve installed the latest firmware for your TrackR.
Can I still use TrackR pixel?
TrackR pixel is a wireless sensor that you can use to keep an eye on your belongings while you’re out of the house. However, if you’re not connected to the internet, you won’t be able to use it.
Here are some tips to help make sure your TrackR pixel is connected:
– Make sure your TrackR pixel is properly charging. It takes about 3 hours to fully charge.
– If you’re having trouble connecting your TrackR pixel, try restarting your device and/or clearing the app’s data.
– If you still don’t have success connecting your TrackR pixel, contact customer support for help.
How do I connect TrackR pixels?
If you have a TrackR Pixel, you can connect it to your laptop or phone by following these steps:
-Open the TrackR App on your device
-Tap on the three lines in the top left corner of the app
-Select “Settings”
-From here, tap on “Connected Devices”
-Scroll down and tap on your TrackR Pixel. You’ll see a green checkmark next to it.
How do I turn on my TrackR?
TrackR is a Bluetooth-enabled device that helps you keep tabs on your belongings and pets when you’re away from home. To turn on your TrackR, follow these steps:
1. Open the TrackR app on your phone.
2. Tap the “Settings” icon in the upper right corner of the app.
3. Under “Device Settings,” tap “Bluetooth.”
4. Turn on Bluetooth and connect your TrackR to your phone.
5. In the “Device Name” field, enter “TrackR.”
6. In the “Device Address” field, enter your TrackR’s IP address (see below).
7. If prompted, enter a password (see below).
8. Tap OK to save settings and exit the Device Settings screen.
If you have more than one TrackR, be sure to enter the unique Device Address for each one.
Your TrackR will now be connected and ready to use!
How do I connect my TrackR pixel to my iPhone?
If you have an iPhone, you can connect your TrackR pixel to it by following these steps:
1. Open the Settings app on your iPhone.
2. Scroll down and tap on Bluetooth.
3. Tap on the name of the device that you want to connect to (in this case, TrackR).
4. Tap on Add New Device.
5. Enter the device’s Address (e.g., 1234:5678).
6. Enter the PIN code for that device if prompted.
7. Tap on Connect.
8. If prompted, enter the passcode for that device if you have one set up.
If you don’t have a passcode set up, then TrackR will automatically connect when you next open the app.
To disconnect from your TrackR pixel, simply tap on the Disconnect button in the top right corner of the Bluetooth window and then disconnect from your device by pressing the Power button and Home button at the same time until TrackR disappears from your list of devices.
If you’re having trouble connecting your iPhone to your TrackR pixel, please check our troubleshooting guide here:\
How do I pair my TrackR Bravo?
TrackR Bravo is a wireless device that helps you keep track of your belongings. To pair the device with your phone, follow these steps:
1. Open the TrackR app on your phone.
2. Tap on the three lines in the top left corner of the app.
3. Select Settings.
4. Under Device Pairing, tap on Bluetooth and select TrackR Bravo from the list of devices. Your Bravo should now be paired with your phone.
conclusion
If you are having trouble connecting your TrackR to your phone, there are a few things that you can check. First, make sure that both your phone and TrackR are properly charged. Second, see if your phone is in range of the TrackR. Finally, check to see if your phone is connected to the internet.
