How to take apart xbox one controller without torx

Xbox One controllers are notorious for being difficult to take apart, even for experienced repair technicians. In this video, we show you a simple, step-by-step process for taking apart an Xbox One controller without the use of a Torx bit. This method is especially helpful if your Xbox One controller is not working and you need to replace its batteries or PCB.

I have given my best possible advice on this topic if you want to know anything comment down below, our team is thriving hard to give you the best.

How do I unscrew my Xbox controller without Torx?

If you have a Xbox One controller and don’t have a Torx screwdriver, there are a few ways to take it apart.

The easiest way is to unscrew the two screws on the back of the controller that hold the battery in. Once those are out, you can lift up the top cover and remove the four screws that hold it in place.

I have covered the next heading to tell you more about this topic, let me knoe if i have skipped anything

Underneath the top cover, you’ll find four more screws that hold the PCB board in place. Simply remove these and the board will come loose.

Inside the controller, you’ll find two more screws that hold down the buttons. Remove these and the buttons will come off.

I would appreciate a thankyou in comments or a suggestion if you have any. Looking forward to your reaction if we were able to answer you

Finally, remove the two screws that hold down the left stick and right stick. The sticks will then be free to move.

What kind of screwdriver do you need to take apart a Xbox One controller?

If you’re looking to take your Xbox One controller apart, there are a few different screws that you’ll need to remove. While a Phillips screwdriver will work for all of the screws, some require a Torx screwdriver. Here’s a guide on how to identify which screw requires which tool:

I should tell about the next thing that everyone is asking on social media and searching all over the web to find out the answer, well i have compiled answers further below
READ :   How do i remove one device from netflix

Phillips screwdriver: Use this for screws with the Phillips head (e.g. battery cover, Blu-ray drive cover, power button).

Torx screwdriver: Required for screws with the Torx head (e.g. Wi-Fi antenna connector, 3.5mm audio jack).

Further answered questions are also very related but given separately because we can't put everything in one subheading let's check further

How do you remove a Torx screw without a screwdriver?

If you have a Phillips screwdriver, then you can remove the screws in the back of the controller by using it to unscrew them. If you do not have a Phillips screwdriver, then you will need to use a Torx screwdriver. To remove the screws, start by inserting the T-shaped head of the screwdriver into the hole that is closest to the end of the screw. Then use your other hand to turn the screwdriver counterclockwise until it comes out. Repeat this process for all of the screws.

What is the easiest way to disassemble an Xbox One controller?

There is no one definitive answer to this question, as the process of disassembling an Xbox One controller will vary depending on the model and edition of the console. However, many users have found that taking apart an Xbox One controller using Phillips head screws is the easiest way to do so.

I would say this is the best explanation to the topic in a breif, however there are many questions that need thorrough reading

How do you open an Xbox One without a screwdriver?

There are a few ways to open up an Xbox One controller without a screwdriver. One way is to use the screws that attach the battery cover to the controller. Another way is to use the Torx screws that hold the internals of the controller together.

What is a T6 screwdriver?

A T screwdriver is a type of screwdriver that is used to take apart electronic devices. It has a Phillips head on one end and a T-shaped handle on the other.

READ :   How to find ssid on android phone

There are several different types of screws that can be taken apart using a T screwdriver. They include screws for TVs, video game systems, and cell phones.

If you need to take apart your xbox one controller, you will need to use a T screwdriver to remove the screws that hold it together. You can then replace the parts that need to be replaced, or fix the device if it is broken.

What Torx screw size is Xbox One controller?

If you need to take apart your Xbox One controller, there are a few Torx screws that you will need to remove. The Torx screw size for the Xbox One controller is T5.

What is a T9 screwdriver?

If you’re like most people, you probably don’t know what a T screwdriver is. You’ve probably used one to unscrew screws, but you may not have realized that they come in different sizes. In this article, we’ll show you how to take apart your xbox one controller using a T screwdriver.

First, identify the T screwdriver that you need. Most T screwsdrivers are about 2 inches long and have a star-shaped head on one end.

Next, locate the screws that hold the controller together. There are usually six of them, but there may be more or fewer depending on the model of xbox one controller.

Once you’ve located the screws, use the T screwdriver to unscrew them. Be sure to use care not to scratch the surface of your xbox one controller while you’re doing this.

What can I use instead of a tiny screwdriver?

There are a few different ways to take apart Xbox One controllers without a torx screwdriver. One way is to use a thin knife. Another is to use a pair of tweezers.

READ :   How to delete telegram files in iphone

What can I use if I don’t have a star screwdriver?

By: Giancarlo Pasquini

If you don’t have a star screwdriver, there are other tools that can be used to take apart an Xbox One controller. A regular Phillips head screwdriver can be used to remove the screws around the grip and buttons, and a flathead screwdriver can be used to remove the screws around the triggers. Once all of the screws are removed, the controller can be unscrewed from the console.


If you need to take apart your Xbox One controller but don’t have the required screws or Torx bits, there are a few things you can do. Firstly, try using a screwdriver that is slightly smaller in size, as this will help to avoid damaging the controller too much. Secondly, if that doesn’t work and you still need to take apart the controller, try using a magnetic tool – this will allow you to grab hold of certain parts without having to use any screws at all. Finally, if none of these methods work and you feel like you are going to damage the controller irreparably, it might be best to just call an expert!

App Clap
Latest posts by App Clap (see all)

Leave a Comment