Ps4 controller wont charge but works when plugged in

There has been a lot of discussion lately about the new Sony Playstation 4 controller not charging when it is plugged in. Many people are wondering if this is just a defect with the controller, or if it is something that Sony is doing purposely. In this article, we will explore the issue and see if there is anything that can be done to fix it.

How do I fix my PS4 controller when it wont charge?

If your PS4 controller won’t charge, it may be because there is something blocking the power supply. Try unplugging the controller and plugging it back in to see if that solves the problem. If not, you can try resetting the controller by holding down the power button for about 10 seconds.

Why does my PS4 controller says its charging but isn t?

If your PlayStation 4 controller is not charging, there could be a number of reasons. Here are a few potential causes:

1) The charger might not be compatible with your PS4 controller. Make sure that the charger is specifically designed for use with PlayStation 4 controllers.

2) The PS4 controller might not be connected to the power source correctly. Try connecting the controller to the power source by using the cable that came with it, or try connecting it to another power source if available.

READ :   How to download modern warfare remastered ps4

3) The battery in the controller might be depleted. If the controller won’t charge even when it’s plugged in, there’s a good chance that the battery is empty. You can try charging the controller by using a wall outlet or using a USB cord that is specifically designed for charging batteries.

4) The software on your PS4 might have an issue. If you’re having trouble charging your PS4 controller, make sure that all of your software updates are installed and that you’re using the most recent firmware version.

How do you fix a dead PS4 controller?

If your PS4 controller won’t charge but still works when plugged in, there are a few things that you can try to fix the issue.

First, make sure that you are using the correct charging cable. Some cables are designed for specific models of PS4 controllers, and others are generic.

If you are sure that the cable is compatible with your controller, you can try to reset the controller by pressing and holding down the power button and the PS4 button at the same time.

If that doesn’t work, you can try to replace the battery in the controller. You can do this by removing the cover on the back of the controller, unscrewing the battery, and replacing it.

Can PS4 controller battery be replaced?

If your PlayStation 4 controller won’t charge but it works when plugged in, there is a chance that the battery can be replaced. Follow these steps to replace the battery on your PlayStation 4 controller:

1. Remove the cover of the controller by removing the two screws at the front and then pulling off the cover.

2. Open the panel on the top of the controller and remove the battery.

READ :   How do i get a pin number for my vanilla visa gift card

3. Replace the battery by inserting it into the panel and screwing it in place.

4. Re-attach the cover to the controller and re-screw the two screws at the front.

How do I clean my PS4 charging port?

If your PS4 controller won’t charge, but it works when plugged in, you may need to clean the charging port. Here is how to do it:

1. Turn off your PS4 and disconnect all cables from the console.
2. Open the front cover of your PS4 and remove the battery.
3. Remove the white panel below the power button and use a can of compressed air to clean around the charging port. Make sure to get behind the port where dust and debris accumulates.
4. Reinstall the battery, white panel, and power button. Close the front cover of your PS4 and turn on your PS4. If everything worked properly, your controller should now charge when plugged in.

Can you overcharge PS4 controller?

Some PS4 controllers will not charge when plugged into the PS4, but they will work when plugged into a PC. Is it possible to overcharge a PS4 controller?

The short answer is that it’s not possible to overcharge a PS4 controller. However, there is a chance that you could overheat the controller if you use it for an extended period of time while it’s charging.

If you are experiencing problems with your PS4 controller not charging or staying charged, try using a different outlet or charger. If that doesn’t work, you may need to replace the battery in your controller.

How do I know if my PS4 controller is broken?

If your PS4 controller won’t charge when it’s plugged in, there’s a good chance that it’s broken. You can try to fix it yourself or take it to a repair shop.

READ :   How to redeem a shark card code on xbox one

If you’re not sure if your PS4 controller is broken, you can try the following steps:

1. Make sure your controller is turned on and connected to the PS4 system.
2. Press the power button on the controller to turn it off and on again. This should reset the controller’s firmware.
3. If the controller still doesn’t work, try to plug it into another outlet and see if the controller charges. If not, your controller is probably broken.

Can a PS4 controller burn out?

Many PS4 controllers may stop charging after a while even when they are plugged into the PS4 console. This does not mean that the controller is broken, but it may just need a new battery.

If the controller still won’t charge, or if it’s just not working right, there may be a problem with the USB port on the console. In that case, you may need to replace the USB port.


It sounds like you may have a problem with your PS4 controller’s battery. Are you able to charge it either by plugging it in or using the AC adapter? If so, has this been working consistently or does it seem to work randomly? If not, there may be something else wrong with your PS4 controller that needs to be fixed.

Leave a Comment