Ps4 controller only works when plugged in

PS4 controllers have been notoriously difficult to work with – whether it’s because they’re not always detected by the system or because they’re not always recognized when plugged in. In this article, we’ll show you how to troubleshoot and solve common problems with PS4 controllers so you can get the most out of your gaming experience.

Why does my PS4 controller keep disconnecting when I unplug it?

If you’re experiencing problems where your PlayStation 4 controller will only work when it’s plugged in, there may be a simple solution. The problem could be caused by a loose wire or connection in the controller. Here are a few tips to try if you’re having trouble connecting your PS4 controller:

1. Check the power connection: Make sure that the power connection between your PS4 and the wall outlet is strong. If you’re having problems connecting your controller while the PlayStation 4 is turned off, try turning on the PlayStation 4 and then trying to connect your controller.

2. Move the cable: If you’ve tried all of the above and still can’t get your controller to work, it may be because of a loose or damaged cable. Try moving the cable around until it connects properly.

3. Reset the controller: If none of these solutions work, you may need to reset your controller. To do this, hold down the power button for about 10 seconds until you see a message onscreen confirming that the controller has been reset.

Why isn’t my PS4 controller working but its on?

If your PS4 controller is not working but it’s plugged in, there could be a few reasons why.

First, make sure that the controller is properly connected to the PS4. If the controller isn’t connecting properly to the PS4, it might not work.

Second, make sure that the controllers power cord is properly plugged into an outlet and into the PS4. If the power cord isn’t plugged in securely, it could cause the controller to not work.

Third, make sure that there is enough power being supplied to the controller by the PS4. If there isn’t enough power being supplied, the controller might not work. Try plugging in the controller and turning on the PS4 while holding down thePS buttonto force a reset on the PS4.

Why won’t my PS4 controller turn on but it will charge?

If your PS4 controller won’t turn on even when it’s plugged in, there may be a problem with the controller. To check if the controller is working properly, try these steps:

1. Make sure that the controller is fully charged. If it’s not, the controller may not be able to connect to your PS4.

2. Try turning on the controller by pressing and holding down the PlayStation button on your PS4 console and then pressing the power button on the controller.

3. If the controller still won’t turn on, try resetting it by holding down both of its buttons for 7 seconds. After resetting it, make sure to plug it in again to your PS4 console and try using it.

How do you reset PS4 controller battery?

If your PS4 controller only works when it is plugged in, you may need to reset the controller’s battery. To do this, follow these steps:

1. Turn on your PS4 and locate the “Settings” menu.

2. Select “System” and then “Controller Settings.”

3. Under the “Controller Settings” tab, select “Battery Life.”

4. On the right side of the screen, you will see a button called “Reset Controller Battery.” Click on this button to reset the controller’s battery.

Why does my controller randomly disconnect?

1. One common issue with PS4 controllers is that they randomly disconnect from the console. This can happen for a number of reasons, but the most common is that the controller’s battery is low.

2. If your controller has gone unused for a while, its battery may be discharged and unable to hold a charge. When this happens, the controller will randomly disconnect from the console.

3. To avoid this issue, make sure you keep your PS4 controller charged and use it regularly. Also, try to keep your controllers away from high-energy areas, like direct sunlight or strong magnetic fields.

Why does my PS4 controller keep flashing white?

One common issue that PS4 controllers experience is that they will only work when they are plugged into the console. This problem can be caused by a number of different factors, but the most common cause is an issue with the controller’s battery. If your controller’s battery isn’t holding a charge, it will likely cause the controller to flash white every time you try to use it.

There are a few things that you can do to try and fix this problem. The first thing you can do is try charging your controller’s battery for longer periods of time. You can also try replacing the battery if it’s not holding a charge. If those solutions don’t work, you may need to replace your controller entirely.

What to do when your PS4 says connect the Dualshock 4 using the USB cable and then press the PS button?

If your PS4 only works when it is plugged in, follow these steps to fix the problem:

1. Connect your PS4 to the internet using the network cable.
2. Press the PS button on your controller to turn on your PS4.
3. Press and hold down the PlayStation button on your controller until you see the light bar change color three times.
4. Release the PlayStation button and plug in your Dualshock 4 using the USB cable.
5. Press and hold down the PlayStation button on your controller until you see the light bar change color three times.
6. Release the PlayStation button and press it again to start up your PS4.
7. If this does not work, try resetting your PS4 by pressing and holding down the power button for 7 seconds or longer.

How do I resync my PS4 controller?

If your PS4 controller doesn’t seem to be working right, there might be a problem with the controller or the PS4 system. Here are some troubleshooting steps you can try:

1. Make sure that the controller is properly charged. The controller should be fully charged before you start trying to troubleshoot the problem.

2. Try resetting the controller by holding down the power button and the PlayStation button for five seconds each.

3. If resetting the controller doesn’t work, try restoring it to its factory settings by following these steps:

a) Select “Settings” from the main menu.
b) Select “System” in Settings.
c) Select “Controller Settings” in System.
d) Under “Type of Controller,” select “PS4 Controller (Original).” e) Press OK to confirm.
f) Press Restart to restart your PS4 system.

Conclusion

If you’re experiencing problems with your PS4 controller only working when it’s plugged into the wall, there might be a quick fix for you. All you need to do is try turning off your power strip and controller’s Bluetooth function. If that doesn’t work, then you might have to take your PS4 controller in for repairs or replacement.