How to put ps4 controller back together

If your ps4 controller has been damaged in any way, it might be time to take it apart and fix it. This guide will walk you through the steps necessary to put it back together.

I have given my best possible advice on this topic if you want to know anything comment down below, our team is thriving hard to give you the best.

How do you put a thumbstick back on a PS4 controller?

If you have a PS4 controller, then you likely know that the thumbstick can be a bit difficult to put back on. In this article, we will walk you through the steps necessary to put a thumbstick back on a PS4 controller.

First, remove the cover of the controller by popping it off using your hands. Next, remove the four screws that hold the top cover in place. Once those screws are removed, lift up the top cover and set it aside.

I have covered the next heading to tell you more about this topic, let me knoe if i have skipped anything

Next, find the thumbstick cable. It is likely going to be coiled up near one of the buttons on the controller. Uncoil it and place it on top of one of the buttons on the front of the console. Make sure that it is centred in the hole on the button.

Now, reattach the top cover by screwing it back into place. Replace any screws that were removed earlier and you are ready to go!

I would appreciate a thankyou in comments or a suggestion if you have any. Looking forward to your reaction if we were able to answer you

How do I take the shell off my PS4 controller?

If you have a PS4 controller, you may have noticed that the shell is removable. This shell allows you to use the controller with other devices, such as a PC.

To take the shell off your PS4 controller, follow these steps:

I should tell about the next thing that everyone is asking on social media and searching all over the web to find out the answer, well i have compiled answers further below

1. Open the PS4 system menu and select “Settings.”
2. Under “System,” select “Controller Settings.”
3. On the Controller Settings screen, under “Device Options,” select “Remove Shell.”
4. On the Remove Shell screen, confirm that you want to remove the shell of your PS4 controller and press “OK.”
5. Your PS4 controller will now be without its shell and you can use it with other devices.

Can PS4 controllers be repaired?

PS4 controllers can be repaired, but it is not an easy process. You will need to have the controller open and the screws removed in order to fix it. Make sure that you have the correct tools before starting this repair.

Further answered questions are also very related but given separately because we can't put everything in one subheading let's check further
READ :   How do you reset an acurite indoor outdoor thermometer

There are a few different methods that you can use to fix a PS4 controller. The most common method is to use a soldering iron and a solder. You will need to heat up the soldering iron and then use it to solder the wires back together.

Another option is to use a Nintendo Wii U Pro Controller Repair Kit. This kit includes all the tools that you need, and it is easier than using soldering iron and solder. You can also use this kit if you want to replace the battery or screen in a PS4 controller.

I would say this is the best explanation to the topic in a breif, however there are many questions that need thorrough reading

How long do PS4 controllers last?

PS4 controllers last around 3-5 years depending on how often they are used. If the controller is not being used regularly, it will last a bit longer.

Does GameStop fix free controllers?

If you’ve got a broken ps controller, you may be thinking of taking it to GameStop — but before you do, you may want to check if they can actually fix it. Unfortunately, GameStop has been known to not always repair Ps controllers properly, and sometimes they just end up throwing them away.

Fortunately, there are other options. Some people have found that repairing the controller themselves is possible, and others have found online resources that teach how to do it. If you’re determined to try and fix it yourself, be sure to follow the instructions carefully so that you don’t damage your controller or yourself in the process.

How do you fix a broken PS4 controller?

If you are experiencing difficulty using your PS4 controller, there are a few steps that you can take to fix the issue.

First, try to determine the cause of the problem. If the controller is not responding properly to button presses or joystick movements, then the problem may be with the controller’s internal circuitry. In this case, you may need to replace the controller.

If the controller still does not work properly, then you may need to fix it by replacing its buttons or straps. To do this, take apart the controller as follows:

1) Remove the front cover by gently pressing down on one corner and then pulling it off.
2) Unscrew and remove each of the three screws that hold down each shoulder strap.
3) Carefully pull each shoulder strap away from the body of the controller.
4) Replace any missing or broken buttons or straps.
5) Put everything back together and screw in the three screws that hold it in place.

READ :   How to sort instagram comments

What causes stick drift?

One of the most common problems with PlayStation controllers is stick drift. Stick drift is when the controller sticks out of the hand and doesn’t respond to the commands that are being sent to it.

There are several reasons why stick drift can happen. Sometimes it’s due to worn or dirty buttons. Other times it can be due to dirt or debris getting inside the controller. And sometimes it’s simply a result of muscle fatigue.

If you notice that your controller is drifting, there are a few things that you can do to try to fix the problem. You can try cleaning the buttons and switches with a damp cloth. You can also try lubricating them with a light oil or spray. And lastly, you can try using heavier weights with the controller in order to strengthen your hand muscles.

Does PS5 have stick drift?

PS5 controller sticks out of the front when connected to a pc

There is a common issue where PS5 controllers stick out of the front when connected to a PC. This problem is often caused by the controller’s stick drift.

Stick drift is a problem where the controller’s stick (the part that you use to move around the on-screen character) moves around irregularly. This can happen for a number of reasons, including dust build-up and poor cable connection.

If you experience stick drift, there are a few steps that you can take to fix the problem. First, you can try cleaning the controller with a dry cloth. If that doesn’t work, you can try using an anti-static spray or an adhesive bandage.

If none of those remedies work, you may need to replace your PS5 controller. However, if you have taken care of your controller and it still experiences stick drift, there is usually no need to replace it.

Why does my PS4 controller left analog stick moves by itself?

If you have a PS4 controller and have been experiencing issues with the left analog stick moving by itself, it may be time to take it apart and fix it. Here are instructions on how to do just that.

READ :   How to see someones old instagram posts

First, you will need to remove the cover of the controller. You will then need to unscrew the four screws on the top of the controller. After those are unscrewed, you will be able to lift off the top of the controller.

Underneath the top cover is where you will find the left analog stick. When you first bought your PS4, it may have come with a replacement left analog stick. If not, you can purchase one separately.

The left analog stick on most controllers is made out of plastic and it can often break. When this happens, the stick will move by itself. Often, this can be fixed by replacing the left analog stick. Instructions on how to do just that can be found below.


Putting the PS controller back together is a fairly straightforward process, but there are a few tips that will make the process easier.

The first step is to remove the screws that hold the controller together. Once these are removed, you can simply pull the controller apart.

Be careful not to drop any of the pieces during this process, as they will become damaged easily.

Once the controller is apart, you will need to clean it up. The easiest way to do this is to use a cloth or paper towel. Just be sure to avoid getting any water on the electronics inside the controller.

After cleaning it up, it’s time to reassemble it. First, put the front panel back on and align it with the screw holes. Then screw in the screws until they’re secure. Finally, put on the rear panel and align it with the screw holes. Again, screw in the screws until they’re secure.

Leave a Comment