how to fix a water damaged ps4 controller

If your PlayStation 4 controller has been damaged by water, there are a few things you can do to try and fix it. First, make sure that the controller is properly dried off. If it is not possible to dry it off completely, then you can try using a hair dryer on high heat. Second, if the controller does not seem to be working properly after drying off, you might need to replace it.

I have given my best possible advice on this topic if you want to know anything comment down below, our team is thriving hard to give you the best.

What happens if a ps4 controller gets wet?

If you’ve ever had your ps4 controller get wet, you know just how frustrating it can be. Not only is the controller difficult to use, but water can also damage the sensitive electronics inside.

Here are some steps that you can take to fix a water damaged ps controller:

I have covered the next heading to tell you more about this topic, let me knoe if i have skipped anything

1) Remove any debris or pieces of plastic that may be inside the controller. This includes anything that has fallen out of the ps4, such as game discs or other pieces of hardware.

2) Remove any excess water from the controller by using a cloth or paper towel. Do not use any harsh chemicals or scrubbing tools; this could damage the controller further.

I would appreciate a thankyou in comments or a suggestion if you have any. Looking forward to your reaction if we were able to answer you

3) Replace any missing or damaged parts with new ones. This includes the battery, if applicable, and the buttons and sensors.

4) Reattach all cables and connections, making sure they are properly plugged in. Test the controller before re-entering your ps4 system.

I should tell about the next thing that everyone is asking on social media and searching all over the web to find out the answer, well i have compiled answers further below

What do you do if you spill water on your controller?

If you spill water on your PlayStation 4 controller, the first thing to do is remove the power cord and disconnect the controller from the console.

Next, remove any Memory Cards and Discs if they are inserted.

Further answered questions are also very related but given separately because we can't put everything in one subheading let's check further

If the controller has a battery, remove it by pressing down on both sides of the battery cover and pulling it out.

Next, use a clean cloth to dry the surface of the device. Make sure that all moisture is removed from the device.

I would say this is the best explanation to the topic in a breif, however there are many questions that need thorrough reading
READ :   The Best Pirate Games for PS5

If necessary, place the controller in a plastic bag to prevent it from absorbing any additional moisture. Place the bag in a cool, dry place.

How do you fix a ps4 with water damage?

If your ps4 has water damage, you will likely need to replace the entire console. If you can fix the water damage, you can save yourself a lot of money and time. Here are some tips for fixing a ps4 with water damage.

1. Remove the Console

The first step is to remove the console from the tv. If there is any water left on the console, it could cause irreversible damage. Remove the screws that hold the console in place and pull it out.

2. Clean the Console and Components

After removing the console, you will need to clean it thoroughly. Sweep any dirt or debris off of it and dry it off completely. Then, use a vacuum cleaner to remove any remaining water droplets.

3. Fix the Damage

If there is any damage to the motherboard or other components, you will need to fix it before proceeding further. Make sure to consult a professional if you are not sure how to do this yourself. Once the damage is fixed, replace the motherboard, power supply, and other damaged components.

Can a ps4 work after water damage?

If your Playstation 4 was damaged by water, there are a few things that you can do to try and fix the problem. First, make sure that the power cord is plugged into an outlet and into the console. If you’re unable to power on the console, then you will need to replace the power cord.

Next, try booting up the console in Safe Mode. To do this, press and hold down the power button until the ps4 screen turns off and then press it again to enter Safe Mode. After you have booted in Safe Mode, try to connect to the network and check for updates. If there are any updates available, then you can install them.

If none of these solutions work, then you may need to replace the ps4 system board. To do this, you will need to take apart the console and replace the system board. Be sure to consult with a repair specialist if you are unsure of how to proceed.

READ :   Why is my ps4 downloading so slow

How long leave wet remote in rice?

If you have a PS4 controller that’s been left wet, it’s important to take care of it as soon as possible. Leaving a wet controller in rice can damage the electronics and make it difficult to use.

To fix a water damaged PS4 controller, you first need to remove any debris that may be on the board. Next, you need to dry the controller completely. You can do this by putting it in a dry environment or using a hairdryer. Once it’s dry, you can replace any damaged parts.

How much does a PS4 controller cost?

If your PS4 controller has water damage, it may not work properly. PS4 controllers typically cost around $60, but you may be able to find a deal on eBay or Amazon.

If the controller doesn’t work at all, you may need to replace it. PlayStation will only allow customers to repair controllers rather than replace them, so be sure to have the correct parts and tools before you start.

If the controller has water damage and some buttons are not working, you can try cleaning the buttons with alcohol and a cotton swab. If that doesn’t work, you can try replacing the button.

How do you fix a PS4 controller that won’t turn on?

If your PS4 controller won’t turn on, there is a chance that it has been damaged by water. Here are some steps to take if this is the case:

1. Remove the battery and unplug the controller from the PS4.
2. Remove the back cover of the controller.
3. If there is damage to the motherboard or circuit board, you will need to replace it. Otherwise, you can try to fix the damage using one of these tips:

– Use electrical tape to cover any exposed wires or components. This will help prevent water from damaging them further.
– Use a hairdryer to heat up the board until it firms up and pops off the adhesive.
– Use a hammer and screwdriver to pry off the board where it has come loose from its adhesive backing.

How do I take apart a PS4 controller?

If your PS4 controller has water damage, it is important to take it apart and dry it out as soon as possible. Follow these steps to take your PS4 controller apart:

READ :   Can i use my ps4 smite account on pc 2

1. Remove the screws that hold the controller together. There are four screws located on each side of the controller.

2. Disconnect the cables from the controller. There are three cables – two blue and one black – located beneath the Battery, Owner’s Manual, and System buttons.

3. Remove the top cover of the controller. There are five Phillips head screws located along the top edge.

4. Carefully remove the top cover of the controller and set it aside. You will now be able to see all of the components inside the controller.

5. Remove all of the components from the controller and place them in a container or bag for later disposal. Make sure to clean off any dirt or debris that may have been left on the components before putting them back together.

6. Reinstall all of the screws and cables into the controller and replace the top cover. Be sure to tighten all of the screws evenly so that they do not come loose over time.


If your PlayStation 4 controller has water damage, there are a couple of things you can do to try and fix it. First, try drying the controller off with a towel. If that doesn’t work, you can put some rice in a bowl and microwave it for about 20 minutes. This will help absorb any moisture from the controller. Finally, if all else fails, you can take your PS4 controller to an authorized service center to have it fixed.

Latest posts by App Clap (see all)

Leave a Comment